E-Mu SP1200 Specifications download pdf (Page 206)

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),

or other means of dissemination may be made without written permission.

3BUS 208 000 R1301184 Maintenance Procedures

Wheel Inspection

The carriage wheels should be checked periodically for wear or damage in the

material. Complete the following steps to check the carriage wheels:

1. Put the Scanning Platform in Local mode.

2. Jog the sensor package to the drive end of the Scanning Platform so that the

carriage wheels are visible at that end.

3. Check for proper wheel and way bar contact.

4. Jog the sensor package slightly to inspect portions of the wheel that are hidden

by the carriage.

5. Replace carriage wheels that exhibit wear or damage.

6. Jog the sensor package to the idler end of the Scanning Platform so that the

carriage wheels are visible at that end.

7. Check for proper wheel and way bar contact.

8. Jog the sensor package slightly to inspect portions of the wheel that are hidden

by the carriage.

9. Replace wheel assemblies that exhibit wear or damage.

MOTOR ONLY

When performing maintenance operations to the

carriage or platform, always lock out the drive motor

power on the lock–out switch at the drive end

column.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 287 288

No comments

E-Mu SP1200 Specifications Page 206