E-Mu SP1200 Specifications download pdf (Page 47)

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),

or other means of dissemination may be made without written permission.

3BUS 208 000 R1301 25Hardware Installation

Handling Instructions

The Scanning Platform arrives on dollies so that it can be maneuvered into place at

the mill. Use caution when rolling the platform on an uneven floor to keep from

getting the wheels stuck in a hole. If you need to lift the platform, see Figure 3-2

and make certain that you observe the following guidelines:

• Attach any rigging used to the two lifting eyes on top of the platform.

• Lifting forces must be spread over 75% of the platform.

• Do not lift from one point.

• Use a crane or hoist to move the platform (a dual pulley house crane is preferred

to prevent weight distribution problems).

• Make certain that the platform is not subjected to bending and twisting forces.

• Do not bump or drop the platform.

• Secure the platform from movement while it is being stored.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 287 288

No comments

E-Mu SP1200 Specifications Page 47